UNIVER TCC-1000, TCC-2000 Series Temperature Cycling Chamber is specially designed to apply temperature cycling on optical fibre cables in order to determine the stability behavior of the attenuation of cables submitted to temperature changes. It features large test chamber, precise temperature control as well as low temperature fluctuations
UNIVER TCC-1000, TCC-2000 Series Temperature Cycling Chamber is specially designed to apply temperature cycling on optical fibre cables in order to determine the stability behavior of the attenuation of cables submitted to temperature changes. It features large test chamber, precise temperature control as well as low temperature fluctuations
UNIVER TCC-1000, TCC-2000 Series Temperature Cycling Chamber is specially designed to apply temperature cycling on optical fibre cables in order to determine the stability behavior of the attenuation of cables submitted to temperature changes. It features large test chamber, precise temperature control as well as low temperature fluctuations
UNIVER AVE-1000 Series Optical Cable Aeolian and Galloping Vibration Testing Machine is designed to perform both Aeolian Vibration and Galloping tests for ADSS according to IEEE 1222, the purpose of these two tests are used to simulate the vibration conditions caused by wind in real installation applications, the vibration fatigue damage can occur on the cable components or hardware at attachment locations so as to the optical signals may also be adversely affected by aeolian vibration.
UNIVER CTC-1000 is designed according to IEC60794-1-21 E1 (IEEE 1222) for tensile testing of outdoor optical cables, this measuring method applies to optical fiber cables which are tested at a particular tensile strength in order to examine the behavior of the attenuation and/or the fiber elongation strain as a function of the load on a cable which may occur during installation. This method is intended to be non-destructive (the tension applied shall be within the operational values).
UNIVER CTC-1000 is designed according to IEC60794-1-21 E1 (IEEE 1222) for tensile testing of outdoor optical cables, this measuring method applies to optical fiber cables which are tested at a particular tensile strength in order to examine the behavior of the attenuation and/or the fiber elongation strain as a function of the load on a cable which may occur during installation. This method is intended to be non-destructive (the tension applied shall be within the operational values).
UNIVER AVE-1000 Series Optical Cable Aeolian and Galloping Vibration Testing Machine is designed to perform both Aeolian Vibration and Galloping tests for ADSS according to IEEE 1222, the purpose of these two tests are used to simulate the vibration conditions caused by wind in real installation applications, the vibration fatigue damage can occur on the cable components or hardware at attachment locations so as to the optical signals may also be adversely affected by aeolian vibration.
UNIVER UVT-1000 Series Optical Cable UV Resistance Test Chamber is specially designed to evaluate the ability of cable sheath materials to maintain their integrity when exposed to ultraviolet, UV, radiation due to sunlight or fluorescent lights, as applicable.
UNIVER XLW-1000 Xenon Lamp Test Chamber adopts xenon arc lamp which is used to simulate sunlight, temperature, rainfall (spray) and condensing (humidity) to produce destructive effect on optical fibre cables