CCA-1000 SERIES
Optical Cable Abrasion Testing Machine
UNIVER CCA-1000 Series Optical Cable Abrasion Testing Machine is specifically designed to evaluate the resistance of optical fiber cable sheaths and surface markings to abrasion.
During testing, a cable specimen approximately 750 mm in length is securely mounted onto the supporting plate using cable clamps. The abrading edge is loaded with the specified mass to apply the required force as defined in the relevant test standard, ensuring the load is applied smoothly without shock to the cable.
Knowledge
The UNIVER CCA-1000 Series Optical Cable Abrasion Testing Machine is specifically designed to evaluate the resistance of optical fiber cable sheaths and surface markings to abrasion.
During testing, a cable specimen approximately 750 mm in length is securely fastened to the supporting plate using cable clamps. The abrading edge is loaded with the required mass to apply the specified force according to the relevant test standard, ensuring the load is applied smoothly and without shock to the cable.
Test Parameters
- Abrasion of Sheaths (E2A):
Stroke: 40 mm | Abrading Head: Steel needle, 4 N load - Abrasion of Markings (E2B – Method 1):
Stroke: 40 mm | Abrading Head: Steel needle, 4 N load - Abrasion of Markings (E2B – Method 2):
Stroke: 100 mm | Abrading Head: Wool felt, 5 N load
Typical Applications
Abrasion for sheath/marking
Abrasion for sheath/marking
Videos
Full range of products
for optical fibre cables (IEC 60794-1-2, IEC 60794-1-21, IEC 60794-1-22, IEEE 1222)
